
Pacific Energy$$
Pacific Energy Summit LE Wood Stove
Wood Stove
Configure, Price & Visualize
Verified Estimate confirms the unit should fit and work in your space, then prices the exact vent kit for your venting plus any install add-ons you’ll actually need. The most accurate number.
Quick Estimate uses the simplest vent kit and a baseline install—a fast starting number, no questions.
Visualizer shows this unit rendered in a photo of your own room before anything is decided.
Product Configuration
Unit, fitting vent kit, and installation—priced right on this page.
This one prices person-to-person—book the free in-home visit and our team measures, confirms every install detail, and writes your estimate on the spot.
Sold and installed from our Ballard showroom · SKU PRT-11010076
Enough stove to heat a big house through a long winter night.
Quick Facts
- Heating Capacity: Up to 3,000 sq ft.
- Efficiency: 74% (EPA 2020 test, higher heating value).
- Viewing Area: 153 sq in
- Maximum Log Size: 20"
- Burn Time: Approx. 8–12 hours
- Fuel: Wood.
- Controls: One air-control lever; the fire burns with no electricity.
- Fan: Optional
Who It's For
In a large home, a mid-size stove keeps one end of the house warm while the other end stays cool, and you are up in the night to reload it. You need a stove with the firebox to heat the whole place and hold a fire until morning. If your home runs up to 3,000 square feet and wood is your main heat, the Summit is the one. Go smaller and you trade a warm house for a lot of trips to the woodpile.
What Makes It Special
The Summit has the largest firebox of the traditional steel stoves and takes logs up to 20 inches. Bigger loads mean fewer of them, and a full load burns approx. 8–12 hours, so the coals are still alive when you get up.
Logs load straight in, front to back, one lever sets the burn, and it heats with no electricity at all. An optional temperature-activated blower moves heat farther through an open floor plan when you want it.
Possible Downsides
- It is built for spaces up to 3,000 square feet. For a single room or a smaller home, the Vista or Super is the better size.
- The blower is optional, not included. Without it, the stove heats by radiation alone.
- The ash disposal system is optional. It comes standard on the Summit Classic.
If you heat a large home with wood and want one stove to carry it through the night, the Summit is the right decision. Cold mornings start with a warm house and a bed of coals waiting for the next log.
The Summit stands on a pedestal or on legs, with an arched door in Metallic Black, Nickel, or Brushed Nickel and an optional blower.
Quick Specs
- Approx. Heating Area
- Up to 3,000 sq ft
- Maximum Burn Time
- 8–12 hours
- Maximum Log Size
- Up to 20″
- Firebox Size
- 2.5 cu ft
- Style
- All · Traditional · Transitional
- Fuel
- Wood
Available at our showroom
Manuals & Spec Sheets
Documentation for this model is available at our showroom.
Can you get an instant online estimate for the Pacific Energy Summit LE Wood Stove?
Yes—right on this page. Configure the Pacific Energy Summit LE Wood Stove and get a free, no-obligation instant estimate covering the unit as configured, a fitting vent kit, and professional installation labor. No phone call required.
What's included in the online estimate?
The unit with the options you selected, a real vent kit matched to your venting, and the installation labor for a typical setup. Your free one-to-two-hour in-home visit confirms every detail before anything is ordered.
Who pulls the permit?
We do, on every job, in every jurisdiction we serve—and we meet the inspector. It's built into the process, not an upsell.
Can you see the Pacific Energy Summit LE Wood Stove in a photo of your own room?
Yes. The Visualizer tab on this page renders the Pacific Energy Summit LE Wood Stove into a straight-on photo of your wall, scaled to the room, so you see it in your space before you price a thing. Phone photos are fine. It's a faithful preview, not an architectural drawing; sizing, venting, and trim get confirmed at the free in-home visit.
Is the online estimate real, or a rough guess?
Real, and honest about what it is: a price for the Pacific Energy Summit LE Wood Stove as configured, a fitting vent kit, and professional installation labor, built from real Seattle installs. It is not binding. The free one-to-two-hour in-home visit checks your actual house before the price is final, and nothing is ordered until then.
Do you install and service the Pacific Energy Summit LE Wood Stove yourselves?
Yes, both. Our own in-house installers set the Pacific Energy Summit LE Wood Stove, run the venting and the gas, pull the permit, and light the first fire before leaving. Afterward the service desk looks after every unit that came from Sutter, with factory-trained technicians and a real date when you call.
Shop the Series, Not the Model
Close Cousins on the Floor
A near-miss on size or budget usually has a cousin that fits—ask the team.
Browse All Wood StovesThe Whole Point
Getting a Fireplace Installed Shouldn't Be a Hassle
Be confident that the details of your project are covered—the permit, the venting, the schedule, the trim that honors your hundred-year-old tile. Then enjoy your home every day of the year.

